Add Printer via IP Scan (Draft)
When to use IP Scan
Use IP Scan when you already know your printer's IP address but PrinterMon's automatic scan does not detect it. IP Scan probes a single host across the full set of printer-control ports and identifies firmware from the responses.
Step 1. Open the IP Scan tab
On the dashboard, click Add Printer. In the dialog, click the IP Scan tab.
Step 2. Enter the printer IP and load
Type the printer's IP address and click Load. PrinterMon probes the host on every printer-control port and fills in the firmware, manufacturer, and model when it can.
Step 3. Confirm details and add
The same confirmation form as Network Scan opens with the auto-detected fields populated. Adjust any field, expand Advanced for non-default ports or webcam path, then click Add Printer to save.
Rate this page